SteadfastIQ Blog
A CCNA study plan that puts labs first
Cisco Certified Network Associate is one of those certifications people underestimate because the name is familiar. The current exam, 200-301 (v1.1 in our catalog), covers a lot of ground: how networks are built, how they are switched and routed, how IP services work, how you secure a device, and how automation is starting to change the job. You can read all of that and still be unprepared if you have not configured it.
This plan is built around the CCNA full course on SteadfastIQ — objective videos, hands-on labs, flashcards, practice questions, and a study guide — with labs as the default activity. SteadfastIQ is not affiliated with, endorsed by, or sponsored by Cisco. Always use Cisco’s official CCNA exam topics as the source of truth.
The exam shape, with the usual caution
Cisco does not publish a question count or a passing score for CCNA the way some vendors do. The official information currently describes a 120-minute exam with performance-based, multiple-choice, and drag-and-drop items, and results that typically arrive within about 48 hours as a pass or fail. Confirm duration and format on Cisco’s page when you schedule.
Practical implication: you need practice under a clock, and you need practice in a workspace that looks like a router or switch prompt, not only in a textbook diagram.
The current official domain weights, which our course follows, are:
- Network Fundamentals (20%)
- Network Access (20%)
- IP Connectivity (25%)
- IP Services (10%)
- Security Fundamentals (15%)
- Automation and Programmability (10%)
IP Connectivity is the largest domain. Automation is a tenth of the exam and is the section most likely to be skipped by people who think of CCNA as “just routing and switching.” Do not skip it.
An eight-week plan (compress if you already live in CLI)
Eight weeks is a steady pace if you can do five weekday sessions and one longer weekend block. People who already work with Cisco devices can compress this. People who are new to the command line should not.
Weeks 1–2: Network Fundamentals. Models, architectures, cabling, IPv4 and IPv6 addressing, and the comfortable use of binary and subnetting until it is not a special event. Use the study guide and videos, then labs that make you actually subnet and address interfaces. Flashcards help the vocabulary (which is large). You are ready to leave this block when you can explain a prefix length and write a simple address plan without a calculator app, even if you still check your work.
Weeks 3–4: Network Access and the first real topologies. VLANs, trunking, switching concepts, wireless basics as they appear in the current outline, and the labs that have you build rather than name those things. This is where many students first get “it works in my head, but the switch disagrees.” Good. Stay in the lab until the switch agrees. Practice questions at the end of each week, reviewed by objective.
Weeks 5–6: IP Connectivity, then IP Services. Routing decisions, static routing, OSPF as required by the current topics, verification commands you can read in your sleep. Then the services domain: NAT, NTP, DHCP, DNS, and the other supporting pieces Cisco lists today. IP Connectivity deserves more calendar than its neighbor. If you have to steal time, steal it from a rewatch, not from a routing lab.
Week 7: Security Fundamentals plus Automation. Security is 15% and very missable if you treat it as common sense. Device access, layer 2 security ideas, and the other fundamentals on the official list get their own labs and a flashcard pass. Automation and programmability get a dedicated midweek block: what controller-based networking is, why APIs and data formats show up, and whatever the current topics require you to recognize. You do not need to become a programmer. You do need to stop leaving this domain at 0%.
Week 8: Mixed labs, timed practice, and a quiet review. Take at least one full 120-minute practice exam in the course. Spend the next day only on misses. Rebuild, from a blank lab, two or three topologies that you previously only passed once. Reread your one-sentence notes. Then taper. Tired fingers make typo mistakes that look like knowledge gaps.
How to work a CCNA lab so it sticks
Read the brief all the way through. Draw the topology, even poorly. Configure from the core outward (addressing, then underlay, then services) unless the brief says otherwise. After every change, verify with a show or ping before you add the next idea. When the lab’s checker disagrees with you, believe the checker long enough to look at the running state.
Then break it on purpose if the environment allows: shut an interface, typo a network statement, forget a trunk — and fix it. Troubleshooting is a CCNA skill, and it is better learned in a lab than in a performance-based item you are seeing for the first time.
Labs are mobile compatible, so you can review a brief or finish a short task on a phone. For anything with more than a few commands, use a desk. Learn on the go has a fuller mobile routine.
Where Hack the Globe fits (and where it does not)
Hack the Globe is a security range: 52 red-team and blue-team levels on a fictional company network, playable on a phone. It will not teach you OSPF. It will give you useful reps for the Security Fundamentals domain and for the mindset of staying inside a scope. If you have leftover energy in week 7, play a few blue-team levels. Do not hide in the range to avoid a routing lab.
Practice questions without the dumps
Use the course questions as a diagnostic. Timed, mixed sets are more honest than a domain quiz you just studied for. Never use leaked “real CCNA questions.” They are a policy problem and a learning problem: you will memorize an item that may not even be current, and you will skip the lab that would have made any wording of the idea easy.
Start at the prompt
Open the CCNA course, open Cisco’s official exam topics, and start week 1 with a fundamentals lab the same day you watch the first videos. Education reimagined, for a networking exam, looks like a prompt you are not afraid of. The reading will still be there when you get back. The lab is how the reading becomes a pass.